STEINIG oil separation conveyor OTF-BE (with belt)

OTF-BE…(1)

  • Bandwidth from 40-200 mm
  • Oil removal with well covered oil layer approx. 4-15 l/h
  • Temperature up to 90 °C depending on belt
  • pH value 3-13
  • Immersion depth ET up to 2000 mm
  • Supply voltage 110 V or 230 V, 50 Hz, operating voltage 48 V
  • Protection class IP 40, with timer, with cable and plug

Version OTF-BEE…(1) is a very inexpensive version but without complete housing, connection 110 V or 230 V, operating voltage 24 V, belt width 40-100 mm

OTF-BE…(2) Belt skimmer

Oil skimmer specially developed for coolant emulsions, but can also be used for other applications.

  • Belt width from 60-100 mm
  • Oil removal with well covered oil layer approx. 3-20 l/h
  • Oil outlet R 3/4″ IG or hose connection 20 mm A-Ø
  • Temperature up to 70 °C depending on belt
  • pH value 4-13
  • Immersion depth ET up to 2500 mm
  • Connection and operating voltage 110 V or 230 V, 50 Hz
  • Protection class IP 40

Special version: made entirely of stainless steel, stainless steel hinge, no ATEX

Micro aerator Aerator

For introducing oxygen into coolant emulsions, and in conjunction with an oil separation conveyor oil skimmer, this considerably extends the service life of the expensive coolant emulsion.

  • Optimum fully automatic individual machine maintenance
  • Drastic reduction in odor problems and bacterial infestation
  • Single machines
  • Container size up to 1000 l
  • Immersion depth ET up to 1000 mm
  • Temperature up to 55 °C

OTF-BET…(3) Belt skimmer

Oil skimmer specially developed for coolant emulsions, but can also be used for other applications.

  • Portable version, with castor lock C and carrying handle
  • Belt width of 40 mm
  • Oil removal with well covered oil layer approx. 4 l/h
  • Temperature up to 60 °C depending on belt
  • pH value 6-9
  • Immersion depth ET 345 or 645 mm
  • Supply voltage 110 V or 230 V, operating voltage 6-12 V
  • Switchable, therefore adjustable speed

OTF-BE…(5) Belt skimmer

Oil skimmer specially developed for coolant emulsions, but can also be used for other applications.

  • Belt width from 25-80 mm
  • Oil removal with well covered oil layer approx. 4-20 l/h
  • Temperature up to 80 °C depending on belt
  • pH value 6-9
  • Immersion depth ET up to 2500 mm
  • Supply voltage 110 V or 230 V, 50 Hz, adjustable speed via operating voltage 6-12 V
  • Protection class IP 40

OTF-BET…(6) Belt skimmer

Oil skimmer specially developed for coolant emulsions, but can also be used for other applications.

  • Particularly robust design
  • Portable version, with tension roller lock D (on both sides with strap) without carrying handle
  • Portable version, with tension roller lock C (one-sided, only with 25 mm wide strap)
  • Belt width of 25 and 80 mm
  • Oil removal with well covered oil layer approx. 15 l/h
  • Temperature up to 60 °C with belt, with chain up to 100 °C
  • pH value 6-9
  • Immersion depth ET up to 400, 800 or 1200 mm (other lengths on request)
  • Supply voltage 110 V or 230 V, 50 Hz, adjustable speed via operating voltage 3-12 V
  • Protection class IP 54
  • With strap 25 mm wide also made entirely of stainless steel

OTF-BET…(7) Belt skimmer

Oil skimmer specially developed for coolant emulsions, but can also be used for other applications.

  • Portable version, with castor lock C, without carrying handle
  • Belt width of 50 mm
  • Oil removal with well covered oil layer approx. 5 l/h
  • Temperature up to 110 °C depending on belt
  • pH value 6-9
  • Immersion depth ET 280, 500 or 800 mm
  • Supply voltage 110 V or 230 V, operating voltage 3-12 V
  • Switchable due to adjustable speed

OTF-BE…(8) Belt skimmer

Oil skimmer Oil skimmer specially developed for coolant emulsions, but can also be used for other applications.

  • Belt width from 30-100 mm
  • Oil removal with well covered oil layer approx. 3.2-20 l/h
  • Temperature up to 95 °C depending on version
  • pH value 2-14
Eintauchtiefe ET
Größe 30/33
Größe 60/39, 80/35
Größe 60/28
Größe 100/56
bis 400 mm
bis 1200 mm
bis 6600 mm
bis 1600 mm
  • Supply voltage 110 V or 230 V, 50 Hz, 24 V
  • Motor with a ventilation slot
  • Device made entirely of electropolished stainless steel, PVC or PP drive roller, passivated steel or stainless steel pull roller

OTF-BEM…(8) Belt skimmer

Oil skimmer specially developed for coolant emulsions, but can also be used for other applications.

  • Belt width 30 and 60 mm
  • Oil removal rate with well-covered oil layer up to 3 l/h with belt 30 mm wide and 6 l/h with belt 60 mm wide
  • Immersion depth ET 100 – 500 mm
  • Temperature up to 40 °C
  • pH value 5 – 10
  • Supply voltage 110 or 230 V, 50 Hz, operating voltage 24 V
  • Motor with a ventilation slot
  • Device made entirely of electropolished stainless steel, drive roller PVC or PP, pull roller St passivated or stainless steel
  • Mounting with magnetic base

OTF-BET…(8) Belt skimmer

Oil skimmer specially developed for coolant emulsions, but can also be used for other applications.

  • Portable version, with handle, on request with tension roller lock C (one-sided)
  • With oil collection container capacity 0.6 or 1.3 l, with snap-on cap
  • Belt width from 30-60 mm
  • Oil removal with well covered oil layer approx. 3-5 l/h
  • Temperature up to 60 °C
  • pH value 2-14
  • Immersion depth ET size 30/41 up to 400 mm / size 60/42 up to 1200 mm
  • Motor drive via NiMH rechargeable battery, rechargeable
  • Operating time approx. 3.5 hours
  • Motor with a ventilation slot
  • Device made entirely of electropolished stainless steel, PVC or PP drive roller,
  • Passivated steel tension roller

OTF-BET…(9) Belt skimmer

Oil skimmer specially developed for coolant emulsions, but can also be used for other applications.

  • Limited portability, as with clamping device
  • Belt width of 120 mm
  • Oil removal with well covered oil layer approx. 45 l/h
  • Temperature up to 85 °C depending on belt
  • pH value 6-9
  • Immersion depth ET up to 5500 mm
  • Supply voltage 110 V or 230 V, 50 Hz, adjustable speed via rotary knob potentiometer, operating voltage 24 V
  • Without hose connection, only with drainage channel
  • With clamping device

OTF-BE…(10) Belt skimmer

Oil skimmer specially developed for coolant emulsions, but can also be used for other applications.

  • Belt width of 120 mm
  • Oil removal with well covered oil layer approx. 40 l/h
  • Temperature up to 80 °C depending on belt
  • pH value 6-9
  • Immersion depth ET up to 5000 mm
  • Supply voltage 110 V or 230 V, 50 Hz, adjustable speed via rotary knob potentiometer, operating voltage 24 V
  • With hose connection vertically downwards
  • For fixed mounting

OTF-BE…(12) Belt skimmer

Oil skimmer specially developed for coolant emulsions, spindle oil, hydraulic oil, oil with a lot of foam (foam must be flowable), plastic chips and many other applications, but can also be used for other applications.

  • Belt width of 29, 49 or 80 mm
  • Oil removal rate with well covered oil layer approx. 3 – 8 l/h
  • Oil outlet hose connection 20 mm A-Ø or via a wide drain channel
  • Oil outlet with special drainage channel for oil with a high foam content, plastic chips or similar
  • Housing made of anodized aluminium
  • Temperature up to 96 °C possible but without steam around the housing
  • pH value 4-10
  • Immersion depth ET in different lengths
  • Connection and operating voltage 230 V or 110 V, 50 Hz
  • Protection class IP 40
  • Mounting via magnetic base or via a clamping tube with simultaneous height adjustment

OTF-BER…(12) Belt skimmer

R = with residual water separator, the small amount of residual water contained in the oil is separated in the oil skimmer and fed back into the tank. The almost pure oil flows into the oil collection tank.
Oil skimmer specially developed for coolant emulsions, spindle oil, hydraulic oil and many other applications, but can also be used for other applications.

  • Belt width of 29 or 49 mm
  • Oil removal with well covered oil layer approx. 3-5 l/h
  • Oil outlet and residual water outlet with 20 mm A-Ø hose connection
  • Housing made of anodized aluminium
  • Temperature up to 96 °C possible but without steam around the housing
  • pH value 4-10
  • Immersion depth ET in different lengths
  • Connection and operating voltage 230 V or 110 V, 50 Hz
  • Protection class IP 40
  • Mounting via magnetic base or via a clamping tube with simultaneous height adjustment