OTF-SL…(1) Hose skimmer / Tube skimmer
Oil skimmer special for coolant emulsions designed, however for other applications to use too.
- horizontal design
- hose / tube Ø 15 mm
- hose length maximum 4 m but with guidance rod longer too
- hose length with 2 units up to 18 m with only one hose
- oil recovery at total covered oil layer approx. up to 5 l/h
- included oil collecting tray
- oil outlet nozzle for hose 25 mm outside Ø
- temperature up to 70 °C
- submersible depth ET 300 mm (at light slope position up to 400 mm)
- input supply voltage 230 V, 50 Hz, operating voltage 24 V
- included transformer, cable about 3.5 m long and plug
- of steel and brass transporting rolls
- mountage with 2 strong magnets or for fixed mounting
special design
free of non-ferrous heavy metal total made of steel or stainless steel
OTF-SL…(2) Hose skimmer / Tube skimmer
Oil skimmer special for coolant emulsions designed, however for other applications to use too.
- vertical design
- hose / tube Ø 12 mm
- hose length maximum 60 m
- oil recovery at total covered oil layer approx. up to 25 l/h
- with oil collecting tray only if oil outlet you wish with a thread to have
- oil outlet over a nozzle-less drain or with thread nozzle R 1” outside thread
- temperature up to 70 °C
- pH-value 6–13
- submersible depth ET 30 m (also best for deep wells)
- input supply voltage 230 V, 50 Hz, operating voltage 24 V
- included transformer, cable about 3.5 m long and plug
- with or without timer switch
- casing of stainless steel, driving rolls of plastic
- mounting over special mounting angel or only over screws to mount
OTF-SL…(3) Hose skimmer / Tube skimmer
Oil skimmer special for coolant emulsions designed, however for other applications to use too.
- Maximum temperature 80 °C, (higher, with special hose on request), pH value 4 – 11
- With hose 5 mm Ø or 10 mm Ø
- Oil removal rate with well-covered oil layer non-binding 2 l/h or 4 l/h
- Water level up to 300 mm below the appliance, with a slight incline also up to 600 mm water level
- Mounting: by means of a 100 mm Ø magnetic base, the rods and 2 locking devices with lever screws, which can be used to adjust the inclination (non-binding up to 25°) and distance
- Motor supply voltage 230 V, 50 Hz, operating voltage 12 V, with loose timer, with cable, plug and integrated transformer, speed adjustable via power supply unit, motor hangs well protected downwards, drive technology for continuous operation
- Hose length up to 25 m without obligation, but the hose should be routed opposite using 2 round hooks
- Dimensions of the device itself: 150 x 160 x 60 mm high
- Oil outlet 25 mm A-Ø, vertical downwards, made of aluminum
- Housing made of black anodized aluminium, oil drain made of aluminium, stainless steel screws, aluminium housing support rod, adjustable support rod made of steel, hose driving wheel made of steel
OTF-SL…(4) Hose skimmer / Tube skimmer
Oil skimmer specially developed for waste water and water, but can also be used for other applications.
- Horizontal version
- Hose Ø 21 mm
- Maximum hose length 40 m (with counter support)
- Oil removal with well covered oil layer maximum 50 l/h
- With oil collection tray
- Oil outlet Threaded connection R 1 ½” AG
- Temperature up to 70 °C
- Immersion depth up to 600 mm
- Supply voltage 230/400 V, 50 Hz, also in accordance with ATEX
- Mounting with screws
OTF-SLV…(4) Hose skimmer / Tube skimmer
Oil skimmer special for coolant emulsions designed, however for other applications to use too.
- vertical design
- hose / tube Ø 21 mm
- hose length maximum 50 m
- oil recovery at total covered oil layer approx. up to 50 l/h
- with oil collecting tank
- oil outlet horizontal with R 1 ½” outside thread
- temperature up to 70 °C
- submersible depth ET 10 m
- input supply voltage 230/400 V (three phase), 50 Hz, according ATEX too
- mounting over screws
- with tension roll possible too
special design on request perhaps
With tension / below roll, with leadership roll direct below the oil Skimmer unit, with opposite roll, with stand, with total roof, with residual water separator (direct mounted onto the stand), with ATEX power drive (not fort he oil skimmer itself)
OTF-SL…(5) Hose skimmer / Tube skimmer
Oil skimmer special for coolant emulsions designed, however for other applications to use too.
- vertical design and up to 65° pivoting
- half open design
- hose Ø 5 mm
- with tension roll safety type D
- oil recovery at total covered oil layer approx. up to 2 l/h
- with oil collecting tank
- oil outlet vertical downwards 20 mm outside Ø
- temperature up to 50 °C
- pH-value 6–8
- submersible depth ET up to 2500 mm
- input and operating supply voltage 230 V (one phase), 50 Hz, with cable plug
- with separate timer switch with daily and weekly program on request
- with on/off-switch and operating light
- with float switch for the customer oil collecting tank
- mounting over mounting plate (mounting magnet on request), holding rod adjustable in the high and pivoted up to 65°, holding arm side adjustable
OTF-SLV…(7) Hose skimmer / Tube skimmer
Oil skimmer special for coolant emulsions designed, however for other applications to use too.
- vertical design
- hose Ø 12 mm
- hose length maximum 8 m with holders
- oil recovery at total covered oil layer approx. up to 2 l/h
- with oil collecting tank
- oil outlet vertical downwards 20 mm outside Ø
- temperature up to 50 °C
- pH-value bis 4–9
- submersible depth ET up to 2 m
- input supply voltage 230 V (one phase), 50 Hz, operating voltage 12 V, speed over setting voltage adjustable
- with trafo, cable and plug
- Mit loser Zeitschaltuhr
- with separate timer switch
- mounting over mounting magnet and 2 adjustments and best fitting position
OTF-SLV…..(8) Hose skimmer
For removing oil floating on water
- Oil removal up to 230 l/h without obligation
- With integrated oil drip tray
- Oil outlet vertically downwards
- Hose diameter 16 – 22 mm
- Maximum hose length 100 m
- Temperature -20 to +90 °C
OTF-SLV…..(9) Hose skimmer
For removing oil floating on water, without obligation as follows:
- Oil removal up to 230 l/h without obligation
- With integrated oil drip tray
- Oil outlet vertically downwards
- Hose diameter 16 – 22 mm
- Temperature -20 to +70 °C
- Inclined position adjustable, allowing this device to be used from horizontal to lower water levels