|
- Quick rotating
- Slow rotating
- Variable speed
- For pressure and vacuum vessels
- Viscosity thinn up to very thick fluently
- With protecting flange
- With tightende flange
- With mechanical seal
- Dry run safe side entry agitators
- Double mechanical seal without extern cooling liquid
Simple mixing, gentle mixing, mixing of heavily foaming liquids, solid-material solution, homogenizing, dispersing, emulsionizing, heat exchange, ventilation, circulation, neutralization, waste-water (sewage) neutralization, galvanizing technique incl. Nickel and chrome-acid bath.
As side entry agitators dry run safe also with internal cooling.
| Motor power | P | up to 15 kw |
| Length | | up to 8.000 mm |
| Mixer diameter | | up to 4.000 mm |
| Capacity | Q | up to 15.000 m³/h |
| Double mechanical seal | p | up to 10 bar |
| Speed | n | 1 - 2900 |
| RV-..F =
| | RV-..S =
| | RV-B = | Aeration agitator patented, specially fine-sparking air-inlet |
| RH = | Side entry agitator, horizontal, dry-run safe possible |
| ST... = | STEISTA-Submersible, stand pump, switchable to agitate/mix or pump |
| RV = | Vertical agitator, in many variations |
| RV-..A = | Agitator with clamps, vertically swingable, with lever clamping screws,
1: of steel, up to 3 kW at 1450 min-1, wall thickness up to 45 mm (larger on request)
2: as 1, but of stainless steel 18/8
3: of Silumin (spec. Aluminium), with internal additional bearing location, up to 1.1 kW, 1450 , wall thickness up to 50 mm
4: as 3, but of stainless steel 18/10 |
| RV-H = | hand agitator up to approx. 1.1 kW, variable speed, electric or compressed air drive, with additional handgrip |
| RV-..F = | Container or barrel agitator, for open or closed barrels / containers
1: with thread R 2", foldable wings / endless screw
2: for open barrels with handgrips, ring propeller, also with protection tube
3: as a special container agitator, with clamp bracket |
| RV-..S = | 1: Agitator with floorstand
2: with wall holder |
| L1 = | motor bearings, same as agitator bearings, no additional bearing location |  |
| L2 = | gear bearings same as agitator bearing |
| L3 = | swinging flange, replaces additional bearing location, with or without sleeve coupling, with V-Ring as integrated protection flange D1 |
| L4 = | Same as L3 but with radial shaft seal as integrated sealing flange |
| L5 = | additional bearing lantern with double ball bearing and sleeve coupling, with radial shaft seal as Integrated sealing flange D4 |
| L6 = | bearing lantern with 4-fold ball bearings, flexible coupling |
| L7 = | counter-friction bearing on container bottom with replaceable friction bearing |
PVC, PP, PVDF. steel, rubbered steel, stainless steel, hastelloy C, other materials on request
For detailed information about the sectional drawing and shaft sealing please click here.
For detailed information about the dimension drawing please click here.
For detailed information about the side entry agitators please click here.
|
