STEISLA - Hose Pump
self-priming, seal-less, dry-run, less pulsating delivery, for dangerous, viscose and abrasive sludges or liquids, variable speed is possible

• temperature: -40 up to +120 °C
• materials:  neoprene, butyl, hypalon, silicon, natural rubber, for food too

 
 
STEIFI - Filter Pump
cartridge-, bag- or disc filter, with or without pump, also self-priming or dry-run safe, filter chamber with easy pull-out chamber for active carbon or similar (empty chamber and fill in new active carbon), filter with sludge collector chamber containing filter cartridges, to change cartridges pull out chamber and clean it from the sludge, back flushing unit and others

• temperature: - 20 up to + 100° C
• materials: PVC, PVC clear, PP, PVDF, plexiglass, stainless steel, rubbered

 
 
STEINO - Water Norm Pump
STEINO - Chemical Norm Pump
STEIWAS - Centrifugal Pump
in according to DIN 24 255, DIN 24 256, also not normed and as short coupled pump

• temperature: - 100 up to + 350° C
• materials:  cast iron, spheric cast iron, cast steel, stainless steel, platic, rubbered

 
 
STEICA - Chemical Centrifugal Pump
also self-priming, dry-run safe with special sealing chamber, for cristalizing or dangerous liquids, also for mini capacities at high pressures

• temperature: - 80 up to + 220° C
• materials:  PVC, PP, PVDF, stainless steel

 
 
STEIMA - Magnetic Centrifugal Pump
STEIMA - Magnetic Gear Pump
STEIMA - Magnetic Peripheral Pump
STEIMA - Magnetic Vane Pump
some sizes self-priming, absolutely seal-less and shaft-less, impeller rotation through closed casing with magnetic power, also in according to DIN 24 256, for dangerous, expensive but clean liquids

• temperature:
  • - -80 up to +350 °C (in metal)
  • -20 up to +100 °C (in plastic)
  • -40 up to +220 °C (for gear version)
• materials:  PE, PP, PVDF, with PVDF insert, ryton, brass, stainless steel, cast iron

 
 
STEIZ - Excenter Pump
self-priming, seal-less, dry-run safe, pulsating delivery, also for viscose liquids

• temperature: - 20 up to + 200° C
• materials:  PE, PP, PVDF, PTFE, stainless steel

 
 
STEITRE - Vane Pump
self-priming, with built-in safety valve (also for capacity regeluation), automatic self-adjusting vanes as pumping elements, some sizes seal-less with magnetic coupling

• temperature: - 30 up to + 110° C
• materials:   casing ryton, brass or stainless steel, rotor stainless steel, vanes carbon

 
 
STEIDOS - Dosing Pump
STEIDOS - Dosing Station
self-priming, seal-less, dry-run safe, stepless variable, as diaphragm, piston, hose, vane, gear and excentric screw dosing pump (as gear pump magnetic coupled too), some sizes with dosing possibility +/- 0,1 %, see under button = Mixer / Doser automatic, electricity-free, for emulsion mixing or similar

• temperature: - 40 up to + 180° C
• materials:  PVC, PE, PP, PVDF, steel, stainless steel, rubbered, hastelloy, titan, glass

 
 
STEIHA - Submersible Hanging Pump
STEISTA - Submersible Stand Pump
submersible depth max. 4.000 mm, free flying shaft max. 800 mm, dry-run safe, seal-less in liquid area, also gas tighting, for dirty or abrasiv liquid,
different STEISTA - submersible stand pumps also switchable from mixing to pumping

• temperature:
  • - 20 up to + 150° C
  • -20 up to +750 °C (liquided metals)
• materials:  PVC, PP, PVDF, cast iron, bronce, stainless steel, high temperature steel

 
 
STEINI - Inline Pump
connection nozzles in one line, some sizes self-priming or seal-less and shaft-less with magnetic coupling or special motor

• temperature: - 20 up to + 200° C
• materials:  cast iron, stainless steel, plastic

 
 
STEIFA - Barrel Pump
submersible depth up to 3.000 mm, on request with flange for hanging fast mounting, electric or air motor, hand operated too, viscosity up to 100.000 mPas, up to 12 bar, also seal-less with magnetic coupling, foot valve or switchable version from mixing to pumping deliverable

• temperature: - 20 up to + 140° C
• materials:  PP, PVDF, aluminium, stainless steel, hastelloy C, steel, cast iron

 
 
STEIGI - Multi-Stage Pump
some sizes self-priming, horizontal or vertical, multi-stage, also with two discharge nozzles for different pressures, some parts free-flying shaft

• temperature:
  • -60 up to +160 °C (in metal)
  • - 40 up to +   80°C
• materials:  PP, Ryton, cast rion, cast steel, stainless steel, bronce

 
 
STEIMEP - Diaphragm Pump
self-priming, seal-less, dry-run safe, pulsing delivery, for high viscos and abrasive liquids, version for solid parts max. 50 x 80 mm, air drive, some sizes with electric motor

• temperature:
  • - 40 up to + 150° C (in metal)
  • - 40 bis + 120°C
• materials:  PE, PP, PVDF, aluminium, cast iron, stainless steel, hastelloy C

 
 
STEINU - Submersible Motor Pump
also dry-run safe, with electric, water or air drive, to submerse included motor, explosion proof or flame proof, discharge nozzle radial or vertical, some sizes seal-less in plastic

• temperature:
  • -20 up to +100 °C (in metal)
  • -20 up to + 85 °C (in plastic)
• materials:  plastic, aluminium, cast iron, stainless steel, special cast

 
 
STEIS - Screw Pump
horizontal or vertical, submersible depth max. 1.500 mm, no stator, for viscosities from 500 - 76.000 mPas, with electric or air drive

• temperature: - 40 up to + 160° C
• materials:  aluminium, stainless steel

 
 
STEISUS - Sewage Water Pump
self-priming, some sizes dry self-priming and dry-run safe, also as short coupled pump, carryable, driveable, with electric-, fuel-, air- or water motor, solid part sizes max. 70 mm diameter

• temperature: - 20 up to + 140° C
• materials:   PP, PPO, silumin, castiron, bronce, stainless steel